Peakworks Temporary Roof Anchor Bracket

Peakworks' Temporary Roof Anchor Bracket is designed to be part of a personal fall arrest system which includes three primary components; approved full body harness (not included), connector (not included), and anchorage connector. Anchor made of high strength stainless steel and zinc plated D-rings to withstand all weather conditions; Built with a minimum tensile strength of 5,000 lb (22.2 kN). Designed for use by a single person with a combined weight (clothing, tools, etc.) of no more than 310 lb; Ideal for residential or commercial roofing operations; Hinged D-rings on both ends allow safe use on both sides of roof. Can be bent to the shape of the roof and installed at the peak of the roof, through the sheathing, directing into a truss; Must use 4 screws (not included) on each side. Meets ANSI Z359.18, CSA Z259.15 and OSHA fall protection requirements.ROOF ANCHOR BRACKET - Peakworks' Temporary Roof Anchor Bracket is designed to be part of a personal fall arrest system which includes three primary components; approved full body harness (not included), connector (not included), and anchorage connectorDURABLE - Anchor made of high strength stainless steel and zinc plated D-rings to withstand all weather conditions; Built with a minimum tensile strength of 5,000 lb (22.2 kN)SAFE USE - Designed for use by a single person with a combined weight (clothing, tools, etc.) of no more than 310 lb; Ideal for residential or commercial roofing operations; Hinged D-rings on both ends allow safe use on both sides of roofEASY INSTALLATION - Can be bent to the shape of the roof and installed at the peak of the roof, through the sheathing, directing into a truss; Must use 4 screws (not included) on each sideMEETS STANDARDS - Meets ANSI Z359.18, CSA Z259.15, and OSHA safety requirements for residential and commercial roofing applicationsShipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item Warranty: 90 Day Woot Limited Warranty